Customer Photos

Under Cabinet Style |  TruSteam Series
Model: SC8830BS with no deflector board

Most ducted microwave hoods comes with a standard 4” ducting which will need to be changed to a 6” or 7” ducting for proper suction. Failure to change the duct will result in reduction of suction power and backdraft. 

Backsplashes are often used to fill in the space behind the microwave that was originally not tiled. 

 ______________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC8830BS
No Deflector Board

______________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC8830BS
No Deflector Board

Under Cabinet  |  TruSteam Series
Model: SC8830BS
No Deflector Board

______________________________________________________________________

Under Cabinet  |  Economy Series
Model: PR3030BS

____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC8830BS
No Deflector Board

____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC8830BS
No Deflector Board

 ____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC8830BS
No Deflector Board

____________________________________________________________________

Under Cabinet  |  AutoClean Series
Model: AC30BS

____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC8130BS
No Deflector Board

____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model:  SC8830BS No backsplash

____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC8830BS     
Converted to wall mount with an optional Duct Cover ( Sold Separately)

____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC88BS with no Deflector Board

This customer could had chosen to add a duct cover (not included) to enclose the expose duct but they preferred this exposed look. 

____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model:  SC8130BS with No Deflector Board

Window installation method is recommended for customers who cannot create external openings to their existing walls. This scenario is often seen in co-ops, condos and other situations where the wall behind the kitchen does not lead to the outside and instead leads to another room or attached to another home. 
Windows must be able to slide up or down, this customer chose to have the ductwork go through the top of the cabinet as opposed to go through the cabinets. 

____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC88BS with No Deflector Board

The total height of this customers’ set up is much higher than the standard height therefore we needed to drop down the hood to meet the recommended height between the bottom of the hood and the top of the stove (25”-30” recommended height). Due to the dropdown there will be an exposed opening that was covered with the stainless steel panel. 

Hood drop down with stainless steel panel is optional.

____________________________________________________________________

Under Cabinet  |  TruSteam Series
Model: SC88BS with No Deflector Board

This basic installation process consists of removing your existing hood and replacing it with the new hood.  No change to the existing ductwork.  It is only applicable on hoods that currently have a 6” or larger ductwork that is already in place.

____________________________________________________________________

Under Cabinet  | Economy Series
Model: PR830BS with Baffle Filter

Installed here with a rear vent exhaust

Pacific Hoods carries hoods that can vent through the top with round ducting, vent through the top with rectangular ducting or through the back with rectangular exhaust.  This example shows a rear vent exhaust with an existing opening (10” x 3 1/4”) that the customer had prior. Simply purchase a hood like our PR830BS/PW23BS/PR30BS for easy rear vent installation.